答：三相潛水泵反轉時電流不高，一般不會引起電纜的發熱或高溫！若有這種情況發生，請盡快拉閘斷電！防止有漏電或觸電的發生！下面介紹幾種解決三相潛水泵反轉的方法給大家！

　　1、假如是三相電機的水泵設備，就可以任意把兩相的位置改變，這樣水泵轉動方向也會改變。

　　2、要是是單相電機啟動的水泵設備，可以調一下接點位置，比如把接點從X換到Y(jié)位置，這樣水泵的方向就會發生改變。

　　3、如果水泵出現小故障，請使其不工作。如果水泵軸上的密封墊磨損，則必須及時添加填料，如果繼續使用，空氣會漏出，這樣做會直接增加了電動機的能耗，從而損壞了葉輪。

三相潛水泵反轉時會導致電動機反轉，從而水泵倒轉，也可以出水，但是出水量很小。如果想正轉，只需要將其中任意兩相對調接線即可。

　　Answer: the current is not high when the three-phase submersible pump reverses, which generally will not cause the cable to heat up or high temperature! If this happens, please switch off the power as soon as possible! Prevent electric leakage or electric shock! Here are some ways to solve the reverse rotation of three-phase submersible pump!

　　1. If it is a water pump equipment with three-phase motor, the position of the two phases can be changed at will, so the rotation direction of the water pump will also change.

　　2. If it is a water pump equipment started by a single-phase motor, you can adjust the contact position, such as changing the contact from X to y, so that the direction of the water pump will change.

　　3. If the water pump has a small fault, please make it inoperative. If the sealing gasket on the water pump shaft is worn, packing must be added in time. If it continues to be used, air will leak out, which will directly increase the energy consumption of the motor and damage the impeller.

　　When the three-phase submersible pump reverses, it will cause the motor to reverse, so that the pump reverses, and water can also be discharged, but the water output is very small. If you want to turn forward, you only need to adjust any two of them to the wiring.

　　Will the reversing cable of three-phase submersible pump heat up at high temperature